Bin Liners

Buy from a huge range of bin liners, bin bags and black sacks for all your waste disposal needs.

Bin liners are...

• Bags used to line bins, but more specifically...
• Polythene bags used to line the inside of dustbin
• Also known as bin bags, waste sacks or rubbish bags
• Used to catch rubbish when it is placed into a dustbin
• Great at keeping the interior walls of the bin clean, stain-free and smell-free
• Excellent at reducing odour levels when collecting and disposing of everyday rubbish
• Handy to use, providing quick and easy disposal of rubbish collected within the bin
• Easily sealed and disposed of when full - just remove the full bin liner from the bin, lift at the edges, grab a handful of polythene from either side and then tie in a knot above the middle of the bag. You can then transport the bin liner to your exterior dustbin or wheelie bin
• Available in a range of shapes to suit all types of bin, including pedal bins, swing bins, square bins, round bins, flip-top bins, brabantia bins or traditional lift-lid dustbins.
• Available in a range of sizes to suit any bin, big or small
• Available in traditional polythene or a range of biodegradable alternatives - perfect for gathering food waste, kitchen waste, composting materials or garden waste

Popular views on waste bags

Biodegradable bin liners need the proper blend of toughness and flexibility if they are going to cope with the rough treatment that happens in stores, kitchens and waste bays. A liner may see fine on a spec sheet, yet still split when a bin is overloaded, pulled away quickly or dragged across a rough floor. That normally comes down to poor control of the film gauge or resin mix, which leaves weak spots in the web and unreliable seal quality. A sensible specification protects against leakage without adding pointless weight, so the liner works in proper handling conditions rather than only in a laboratory test.

Rubble bags work optimal when they can take rough, mixed timber waste without tearing, because loose offcuts quickly creep across the floor and turn a tidy area into a hazard. A sound bag retains sharp ends, splinters and strange-shaped parts together, which makes clearing a saw area or bench line much quicker at the stop of a shift. It also cuts down on handling damage caused by dragging loose scrap into piles by hand. When waste stays contained, the shop floor is easier to work on and forklift routes stay clearer, so daily movement is less awkward and less likely to cause a delay.

Waste sacks only work properly when the waste stream is kept clean from the beginning, because soft domestic-style fillers and clinical waste with a sharp concealed inside behave in absolutely alternative methods. A sack that is fine for paper, gloves or light non-sharps material can fail the moment a needle or broken instrument is mixed in, since puncture resistance and film gauge were not ever meant to cope with that sort of load. The result is not only a tidier bin issue nevertheless a proper exposure risk for anyone handling the load afterwards. Good segregation at origin retains the sack within its limits, and that is where safe disposal starts.

27lt Organic Rubbish Bags

Rubbish bags fail first when the film grade is gross for the waste being put into them. A light sack may be fine for dry office or kitchen waste, nevertheless once the load includes wet scraps, tins, broken packaging or other sharp edges, the bag requirements more gauge and better seal quality to stay sound. Thin film can see tidy on the roll and still split in service, which causes leaks, additional cleaning and wasted time at the point of assortment. A sensible specification balances puncture resistance with resin use, so the bag does the job without becoming fat or awkward to handle.

House Proud Extra Large Refuse Sacks 16pk

Refuse sacks only work properly when the film is matched to the sort of waste it has to transport, because thin material can split as soon as sharp board edges, food trays or mixed shop-floor arisings press into it. A better sack uses a controlled blend of polythene suppliers grades so the bag has enough stretch to absorb rough handling without losing shape. Gauge matters as well, since a small change in thickness alters pallet yield, roll weight and how often packs need replenishing at the point of use. The proper balance retains waste moving without littering the yard with burst bags.

Brabantia PerfectFit Bin Liners, 30L - Size O, 20 Bags

Bin liners fail more often from poor material control than from simple lack of thickness, so the proper job is to match the film to the waste stream and the handling method. A high-density grade can resist punctures even when the gauge sees modest, while a more flexible blend copes better with sharp corners, mixed waste and sudden stretch at the rim. If the melt flow is uneven, seams weaken and the sack can split only where the load is heaviest. That is why proper extrusion, sensible seal settings and a proper rim design matter as much as the headline microns.

Bin bags are judged by how well they survive rough handling, not by how cost-effective they see on a tender sheet. The proper test comes when awkward waste, wet contents and sharp offcuts all land in the same sack and beginning pushing at the film from inside. A sensible specification uses the proper gauge and a polythene suppliers structure that resists puncture without becoming so heavy that transport and storage waste space. Seal quality matters only as much, because a weak bottom seam turns one failed sack into a dirty transport problem. That is why supply decisions should follow field performance, not only a price per thousand.

Black sacks are chosen as much for waste logistics as for appearance, because the rough treatment they face in bins, hoppers and rounds determines the film specification far above most people realise. When residual household waste is collected regularly, there is less odour and less liquid sitting in the bag, so a lighter polythene suppliers can often do the job without failing at the seams. That saving only works if gauge control is tight enough to grasp dart impact and puncture resistance, since a sack that splits on a bin lip or in the compactor creates litter, complaints and additional clean-up. A well-set sack specification so saves material without inviting handling damage.

Pages in Bins and waste assortments, food waste bags, garden waste sacks and missed bins

Food waste bags need to cope with heavy, wet contents without splitting on the method to the caddy or bin. A thin film may see fine on the reel, nevertheless once it is filled with peelings, tea bags and greasy scraps, weak seals and poor gauge control display up fast. A better bag combines the proper thickness with decent seal quality and a shape that sits neatly in the liner bin, so it stays in position amid handling. That reduces leaks, odour and awkward clean-up in the kitchen, which is the proper test of the product.

Cheap black sacks are often a false economy because thin film and uneven gauge do not stand up to hard warehouse use. A bag that sees tidy when first filled can fail quickly once sharp edges, rough floors and repeated lifting put strain on the weakest points. Welds split, corners stretch and contents beginning escaping, which creates additional cleaning, repacking and delay at dispatch. In practical terms, a sack requirements enough strength to survive normal handling without turning a simple waste or packing job into a complaint on the floor. When the bag grasps its shape properly, the bay stays cleaner and the operation retains moving.

The bin liner - a brief history

The bin liner is such a part of modern day life that you could be forgiven for thinking it was always there, but of course it wasn't!

In Canada in 1950 an inventor by the name of Harry Wasylyk from Winnipeg, Manitoba, alongside his colleague Larry Hansen - another Canadian, from Lindsay, Ontario - invented the first polyethylene bin liner, which was the colour green.

Of course, being a North American creation, the world's very first bin liner wasn't called a bin liner, or even a rubbish bag, but a garbage bag (that's rubbish, North America!).

Whilst obviously very clever chaps, Messrs Wasylyk and Hansen didn't quite spot the future direction for the humble bin liner and the fact that it would end up in millions of homes around the world, as the first bin liners were designed for commercial use rather than use at home.

Having sold the first bags to the Winnipeg General Hospital, Wasylyk and Hansen sold their invention to the Union Carbide Company, Lindsay, where they worked and the company saw their potential for future use. Union Carbide began manufacturing the first green garbage bags for home use that decade and the very first bin liners (or garbage bags) for home use went on sale in the late 1960s under the name Glad Garbage.

So if you like bin bags then you should be glad for Glad Garbage, even if you aren't glad that the name includes the term garbage. It's probably a better, or less rubbish, brand name than Glad Rubbish anyway, even if it sounds a bit rubbish to call rubbish garbage.

Make sense? Well, congratulations to Messrs Wasylyk and Hansen for their clever invention, which is anything but rubbish… or garbage for that matter. Here's to you sirs!

Bin liner types - one size does not fit all

What does the term 'bin liner' mean to you? What sort of bin springs to mind and, more importantly, what sort of bin liner or bin bag do you think of fitting inside that bin?

Those very questions will prompt a wide range of answers, depending on who you speak to, reflecting the huge variety of bin liners available to fit the broad and varied array of bins or rubbish receptacles out there.

Bin liners range from very small bags that fit mini pedal bins - the sort commonly found in bathrooms - or kitchen caddies made from biodegradable material that are used to collect food waste disposal, right up to industrial sized bags that fit in wheelie bins or large compactor bins used predominantly outside business premises.

In between, you'll find a broad range of bin bags and liners that cater for bins of all shapes and sizes, including:

• Traditional dustbins
• Pedal bins
• Swing bins
• Square bins
• Flip-top bins
• Push-top bins (e.g. Brabantia)
• Wheelie bins
• Food bins / Kitchen caddy
• Compost bins
• Compactor bin
• Recycling bins
• Public litter bins

Bin liners - a black and white issue

The vast majority of bin liners or bin bags - depending on which term you prefer to use - are made from either black or white polythene, although there is a huge range of colours available to meet various waste disposal needs (more details below).

When considering black or white polythene, a good rule of thumb for bin bags is that thin means white and thick means black. Of course this is not always true - the gauge of polythene used for both white and black polythene bin bags will vary - but more often that not, thicker bags are made of black polythene.

Bin liners made from white polythene include a range of bags to fit small bins for domestic use, such as pedal bins, swing bins or square bins. These bags are commonly made from thin, lightweight white polythene as they are designed to deal with light duty use - e.g. tissues, toilet rolls innards, pencil sharpenings etc.

The old-fashioned classic black bin bag is that used for your everyday rubbish, whether in your kitchen bin, an outside dustbin or just used loose to collect rubbish from a wide area, e.g. clearing up after a party.

The standard dimensions of a regular black bin bag are between approx. 85cm and 100cm long - approx. 34” to 39” - and between 64cm and 74 cm wide - approx. 25” to 29”.

More so than white bin liners, black bin bags come in a huge range of thicknesses, from the cheap and cheerful ultra-light price beater sacks at 80 gauge thick, to the ultra thick heavy duty bags, which are up to 350 or 400 gauge thick.

So you could be forgiven for thinking your choice of bin liner is a black and white issue, although this is not the case. Bin liners are available in a huge variety of colours. The coloured varieties tend to be slightly more expensive than the standard black variety, but they can be helpful in many other ways. Here is one of them...

Where to buy bin liners

Bin liner manufacturers and suppliers include:

Rubbish Bags
Discount Rubbish Bags lives up to its name, providing customers with a wide range of rubbish bags, waste sacks and bin liners at discount prices. Contains loads of information, giving you the very best opportunity to buy the right rubbish bag at discount prices.
www.discountrubbishbags.co.uk

Bin Liners
A very helpful website for any customer looking to purchase bin liners for any type of waste disposal. Featuring information on different types of polythene bin liner and eco-friendly alternatives, this website has your bin liner needs covered.
www.binliners.org

Bin Bags
Bin Bags is the website for all your bin bag needs. Whether you are shopping for traditional black waste sacks, bin liners or eco-friendly alternatives, this website will help you find the right bin bag for you.
www.bin-bags.co.uk

Black Bin Liners
Whatever type of bin bag or waste sack you are looking for, Discount Bin Liners is sure to help you make the right decision. From pedal bin liners to clinical waste disposal sacks and swing bin liners to wheelie bin bags, this site will help you get the right bin liners at great discount prices.
www.discountbinliners.co.uk

Wheelie Bin Liners
Discount Wheelie Bin Liners is a useful resource on bin liners, bin bags, waste sacks and eco-friendly bin liners. With bin liner news and a list of bin liner manufacturers, this is a bin liner website you don't want to miss.
www.discountwheeliebinliners.co.uk

Advice from the web on waste bags

Biodegradable bin liners still need the toughness of normal sack stock if they are going to earn a place on the warehouse floor. A liner that rips on a trolley edge or splits when a full sack is lifted causes additional labour, additional secondary bagging and a messier waste stream, so gauge control and puncture resistance matter only as much as the eco label. The proper test is whether the converter can grasp extrusion evenly and retain the seal sound, because thin spots and weak seams display up amid handling, not in the brochure. A liner that survives daily use saves time and reduces complaints straight away.

Rubble Bags

Rubble bags have to cope with sharp waste and rough handling, so a light sack normally fails long before the job is finished. A heavier plastic grade gives better resistance to punctures from broken brick, plaster fragments and timber offcuts, which makes a proper contrast when bags are dragged across a site or shifted in the yard. Strength alone is not enough, though, because the gauge must match the waste being loaded. If the contents are overfilled or left with jagged corners sticking out, even a decent bag can split and spread debris where it should not be. A sound specification saves re-bagging and retains the area tidier.

Waste sacks only work properly when the service rules match the method they are handled in the depot and on the round. A renewal system with no mid-term refund may feel strict, nevertheless it assists retain stock aligned with fixed assortment schedules, vehicle loading and the cost of holding bags for seasonal demand. Garden waste sacks often sit outside the main renewal cycle because they behave more like an occasional product than a standing service item. That separation retains select-face control tidier and reduces the risk of dead stock building up. The proper value of the policy is not the paperwork; it is the cleaner flow of bags through storage, dispatch and assortment.

Be the first to review “80LTR Rubbish bags” Cancel reply

A 240-litre waste bag has to be built for rough handling, not only for display on the reel. The film requirements enough gauge to resist sharp offcuts, damp food waste and the weight of mixed waste without tearing as bins are moved through a store room or service area. Converting makes a big contrast here: proper film tension, even gusseting and a sound base seal assist the sack retain its shape and grasp together below load. If any of those details are off, the bag may fail when it is dragged, overfilled or lifted at an awkward angle, which means mess on the floor and additional handling.

Refuse sacks earn their retain through the method the film grasps up when mixed waste, broken packaging and rushed handling all meet at the select-face. A stiffer high-density polythene suppliers sack can transport sharp offcuts and heavier contents with less risk of puncture, while lower-density film stretches more readily around awkward loads and fat light waste. That selection affects far above strength alone, because gauge changes the weight of each sack, the space it takes in a carton and how neatly it sits on a pallet. A sack that opens cleanly, ties properly and avoids neck tearing saves time in routine janitorial work and reduces handling damage before the load even reaches assortment.

What makes our Compostable Bin Liners so superb?

Compostable bin liners need to be chosen by load, not by size label alone, because a 30 or 60 litre sack can fail long before the bin is full if the film is also thin or the seam will not grasp. The smaller formats are normally fine for light washroom waste and below-desk bins, nevertheless heavier and wetter contents ask more of the gauge, puncture resistance and rim fit. If the film stretches also much, the bag slips down the container and spills become likely. A workable specification gives enough strength for proper handling without pretending that all compostable polymers behave the same as normal polythene suppliers.

Black Refuse Sack HD Bin Bags(18x29x38′) PK 200

These bin bags aim for the sensible middle ground between flimsy liners that split at the knot and overbuilt sacks that transport more plastic than needed. A 27 gsm film normally points to a denser polythene suppliers blend with enough puncture resistance for mixed daily waste, from food scraps to torn carton, without turning each sack into dead weight. That balance assists at packing stage as well, because the material still folds closely enough for tidy case packing and stable pallets. In practice, that kind of specification retains warehouse space below control and avoids the mess of half-used outer cartons collapsing on the shelf.

Black sacks earn their place because opacity changes how waste and loose items are handled at origin. When contents cannot be seen quickly, there is less casual interference at a loading bay, in a vehicle, or on a kerbside, and that matters as much for security as for tidiness. The better sacks are manufactured from high-density polythene suppliers with enough gauge to cope with rough waste, awkward edges and repeated lifting without the side weld giving method. There is always a balance to strike: thinner film improves yield and cuts weight, nevertheless it also raises the risk of splits where handling is harshest. A sensible specification matches concealment with strength, so the sack does its job without becoming a weak point in the waste route.

Waste bags need to be manufactured for daily handling, not only for a list of products description. A bag for dog waste has to open easily, grasp together when filled, and resist early tearing in a pocket, dispenser or litter bin. Film gauge, seal quality and the method the roll is perforated all affect how the product performs once it leaves the packer. If the material is also thin, pollution becomes a risk; if it is above-specified, material cost and waste rise for no superb reason. Good product design retains the bag practical for staff and proper for stop users, which is what retains complaints down.

Cheap black sacks only make sense when the film gauge suits the waste being collected, because a below-specified bag becomes a false economy very quickly. Mixed waste, broken board and sharp trim offcuts work hard against the sack wall, and a thin film is more likely to split than give and recover. Poor dispersion of carbon black can make the sheet see acceptable on the roll, yet leave weak patches that fail as the load settles. Once that happens, litter spreads, lining changes take longer and the bin area becomes harder to retain clean. A low-price sack that cannot survive the fill normally ends up costing more before the shift is finished.

Research & Resources

For more information on bin liners and bin bags, from manufacturing to methods of recycling, plus a list of polythene and biodegradable bags available, please visit:

PackagingKnowledge: The go-to knowledge site for the UK's polythene packaging industry, containing a huge wealth of information and useful articles on bin liners.

PlasticBags.uk.com: The UK's number one polythene packaging directory. List your products for free or browse through a fantastic selection of bin liners websites.

Goldstork: Search through specially selected information on bin liners in this free 'pick-of-the-web' directory.

Organise your recycling with coloured bin liners

If you want to separate your rubbish or waste to make it easier to dispose of, then coloured bin liners or bin bags could be just what you are looking for.

Today you can buy bin bags in a range of different colours to cater for your waste disposal needs, whatever they are.

If you just want to separate your rubbish into recyclables and non-recyclables, then why not choose black bin bags for your general waste and then green bin bags for your recyclable waste. You're doing your bit for the environment, so why not choose a green bin bag for your green waste?

The colour of bag you need may be determined by your local council or the company that collects your rubbish. Many people have wheelie bins of a certain colour that need to be filled with a particular type of waste but, in some instances, wheelie bins aren't a practical solution so coloured bin bags solve that problem.

Always check with your local council or the relevant organisation managing your waste disposal, but the following waste is often associated with the following colour of bin bag or wheelie bin:

• General (non-recyclable) rubbish - black
• Garden waste - green or brown
• Food waste - green or brown
• General recycling - green
• Plastic recyclables (bottles, trays etc.) - blue
• Aluminium (cans or tins) - grey or silver
• Hazardous waste (e.g. asbestos) - red
• Clinical waste (as used in hospitals) - yellow

Clear bin liners

There is one other 'colour' bin bag not referred to in the list of coloured bin liners. That is partly because it was worthy of a mention all on its own and partly because it doesn't really have a colour - it's see through!

Clear bin liners, otherwise known as see-through bin liners or transparent bin liners, are very useful for managing your waste disposal. They allow you to keep an eye on the rubbish being disposed of to ensure that no foreign materials other than those allowed are dumped in the bag.

Imagine an office where there is loads of paper recycling, but it has to be paper only being thrown away in the bag because it is all tipped straight into a giant shredder. Well what if someone accidentally threw their empty drinks can into the paper bin after finishing their drink?

If you were using traditional black bin liners you might never see that can, which could cause irreparable damage to a very expensive printer. But if you're using clear bin liners then, when you take the bin liner from out of the bin, it's very easy to take a quick look at the contents of the bin. Give it a quick shake about to check there's nothing trapped in the middle that shouldn't be there, and then you're done.

Clear bin bags are very popular in the workplace and are available in a range of thicknesses, to deal with light duty use such as paper, right through to super heavy duty bags for disposing of rubble and other hardcore materials on building sites etc.